Mobile Phone Tools

- Plug Your Phone on the Cable
* On E398, V635 I sugest take the TransFlash off
- When the status apear 'Connected'
- Hit 'Refresh' to get the file list.
- Select the folder 'Skins'

- Right Click on the folder 'Skins' Will apear a sub-menu
Select the option 'Create Folder'

- Put the Name of the Skin, must be the same name of the '*.ski' File!

- Hit 'Refresh' to get the new file list.

- Select the new folder that was cereated. (The one that contain the same name of the *.ski)

- Hit 'Upload' to upload the skin files to the phone.

- Select all the files with *.DAT and *.Ski Extension

- Hit 'Open' to Upload

- Wait a Minute while P2KTools Send the files to your phone.

- Select the folder 'Picture'

- Hit 'Upload'

- Select the wallpaper and Screen Saver of the skin

- Hit 'Open' to Upload

- Wait a Minute while P2KTools Send the files to your phone.

Done it, restart your phone and check out your new skin..

This function also repairs phones with blinking and white screen (WSOD), mobile phones with message 'Configuration error, Please contact your network operator or service center'. To enable all the features of the upgraded firmware it is recommended to do settings reset after performing this flashing procedure. For this go to Menu -> Settings -> Master Reset -> Reset Settings.
1. Make sure your mobile phone's battery is fully charged. Battery discharge during unlocking/flashing process may damage the cell phone.
2. Power off phone, remove battery and sim card, reconnect battery and connect cable to phone and PC. Phone has to remain switched off.
3. Enter username and password
4. Select phone and model from the dropdown list (SONYERICSSON Z525) [2].
5. Check off 'Generate ATS' option [17].
6. Enter download area [16]. The list of available files will appear in the output window [18]. Select and download firmware file of the latest version (e.g. R7B039 on the picture) and required language file. Note, that the version of both Firmware and Language files MUST match. Explanation of language acronyms.

# Click 'Flash Menu' tab [4] and select previously downloaded firmware and default language [6]. Both files have to be flashed at the same time.
# Press 'Program Files to Phone Memory' [9].
# When prompted shortly press phone's "Power" button and follow the on-screen instructions. Note, that phone has to stay off all the time.

Please note, PUK and PIN codes can't be recovered by this method, you have to contact your service provider for that.
Security code allows access to the main user area of the phone. It is also known as:
* Security Code
* User Code
* Phone Code
* Lock code
# Make sure your mobile phone's battery is fully charged. Battery discharge during unlocking/flashing process may damage the phone.
# Power off phone, remove battery and sim card, reconnect battery and connect cable to phone and PC.
Compatible cables.
# Enter username and password [11]
# Select phone and model from the dropdown list [2].
# Click 'Unlock Menu' tab [3].
# Check off 'Generate ATS' option.
# Press 'Unlock Phone + Read User Code' [6].
# When prompted shortly press phone's "Power" button and follow the on-screen instructions. Note that phone has to stay off all the time.

Use only cables compatible with the unlock software.
See cable compatability chart to determine which cable fits your phone.
Multiserver or Cruiser cables require drivers to be installed prior to connecting the phone.
# Help : Display available help on selected phone and model
# Brand & Model : Dropdown lists to select needed phone brand and model
# Unlock Menu : Click to activate unlock menu and access unlocking functions
# Flash Menu : Firmware upgrade, debrand, decustomize, change main phone language
# GDFS Menu : This function is used in conjunction with ARM+AVR flashing. It removes remaining operator customization, branding, settings and start up logo
# Unlock Phone + Read User Lock Code : Press to perform the selected functions (credit discounted)

# Check RSA or Test Cable : Press to test cable (no credit discounted)
# Port : Select from available com ports
Problem determining which port to select?
# Cable Speed : Select lower speed for more stable connection
# DTR, RTS options : Check/Uncheck if phone can not connect to PC
# Original Sony Ericsson PC-Suite USB Cables : Select one of the checkboxes for the cable you are using
# Username & Password : Enter username and password
# Info : Press to check available credits
# Download area : Access to download area
# Generate ATS : Check to enable ATS error reporting. In case of error email .ats and .jpg files located in program folder to Sony Ericsson z525

# Output screen
# Select Firmware : Select firmware that previously was downloaded from the download area of the TMS server
Select Default Language : Select language file that previously was downloaded from the download area of the TMS server's download area
# Disable Camera Shutter Sound while Flashing : Check off to disable camera sound when taking pictures with your mobile phone. This is optional.
# EROM Repair Current Phone Color : Available options are Blue, Brown, Red.
This "color" defines what kind of phone we are dealing with. BLUE phones has been assembled at the factory, but have never been programmed with software/GDFS/IMEI (remember, IMEI number is stored in the OTP, One Time Programmable memory) BROWN phones are "developer phones", for testing. Less restrictions are present, as these are used for "debugging" or "beta" purposes.RED phones are your typical retail ones.
# EROM Repair Repair / Reflash Phone EROM : Use for changing selected EROM type. Should be used to repair dead after flashing phones, before model conversion (e.g. Sony Ericsson V800 to Z800 or Sony Ericsson K750 to W800 conversion). When changing EROM for model conversion purposes use BROWN from the dropdown list. (no credit discounted)
Another value associated with EROM is CID. CID = This "number" defines the version of SE's protection present in the phone. New CIDs are deployed from time to time, for the sole reason of preventing them from beeing unlocked/flashed/tampered with by non-SonyEricsson service tools. Current CIDs in use by SE are 29, 36, 37, 49, 51.
When flashing (debranding, upgrading firmware etc) always use the same or greater CID than the one currently in your phone. Don't use flash files with lower CID numbers. .
# Program Files to Phone Memory : Press to perform the selected functions (credit discounted)